CALL US TO SCHEDULE A SERVICE 407.966.MEGA
Call MEGA DOOR CO— The Hangar Door Specialists 407.966.MEGA
For all your hangar door needs, trust MEGA DOOR CO. We deliver expert installation, service, maintenance, and repair for all major door systems, including:
Licensed, Bonded & Insured | 24/7 Emergency Service
When selecting the ideal door system for aviation and large-scale industrial facilities, bi-fold hangar doors stand out for their exceptional spatial efficiency and structural reliability. Unlike traditional door designs that swing outward, bi-fold doors lift smoothly upward, folding neatly at the top of the doorway. This vertical operation drastically reduces the clearance needed directly in front of the building, allowing aircraft, support vehicles, and staging equipment to park much closer to the threshold without impeding door function. By maximizing usable apron space and eliminating ground track hazards, bi-fold doors create a seamless, obstacle-free entrance that optimizes overall site workflow and footprint.
Beyond operational convenience, engineered bi-fold door systems deliver superior weather resistance, structural integrity, and long-term durability against extreme coastal winds. Designed to handle severe weather conditions without sacrificing smooth motor performance, these doors feature heavy-duty steel framing, reliable cable or strap drive systems, and tight environmental seals to keep heat, moisture, and debris out. Whether installed on residential pilot hangars, commercial aviation centers, or specialized agricultural buildings, bi-fold doors offer an attractive, low-maintenance solution that enhances facility security, improves energy efficiency, and protects high-value assets for decades.
For aviation facilities and high-traffic industrial buildings where time and climate control are top priorities, hydraulic hangar doors offer an unbeatable operational advantage. Engineered to swing outward as a single, solid panel, hydraulic door systems open up to 25 percent faster than traditional large door alternatives. This rapid cycle speed significantly minimizes the time the door stays open, preventing valuable conditioned air from escaping during aircraft rollouts and staging. By drastically reducing thermal transfer during operation, hydraulic doors serve as the ideal high-performance barrier for heat-controlled facilities, climate-sensitive maintenance bays, and energy-conscious commercial hangars.
In addition to superior opening speeds and energy savings, hydraulic doors deliver exceptional structural strength and clean architectural aesthetics. Powered by heavy-duty hydraulic cylinders and compact pump units, these single-piece doors create a tight, weather-resistant seal against extreme winds, driving rain, and coastal humidity when fully closed. When opened, the rigid door panel acts as a natural canopy, offering extra shade and overhead weather protection directly over the apron entrance. Combining minimal moving parts with smooth, low-maintenance hydraulic power, these door systems provide facility owners with a durable, high-speed solution designed to streamline daily workflows while safeguarding high-value equipment.
When simplicity, cost-efficiency, and long-term durability are paramount, horizontal sliding hangar doors remain one of the most reliable choices in the industry. As the most fundamental door design available, single or multiple panel horizontal sliding systems rely on a straightforward mechanical setup that eliminates complex lifting cables and high-stress overhead components. This simple, low-maintenance architecture makes them a timeless, widely trusted solution for everything from private pilot hangars to large commercial aviation facilities. By sliding effortlessly along bottom-mounted tracks or top-hung guide systems, these doors deliver smooth, dependable operation day in and day out with minimal wear and tear.
One of the greatest operational advantages of horizontal sliding doors is their exceptionally low overhead footprint. Requiring as little as six inches of headroom—or zero headroom when utilizing a top-mount configuration—these systems maximize usable interior clearance, making them ideal for facilities with strict height restrictions or low rooflines. While horizontal sliding doors do require dedicated side clearance in either direction to accommodate the panels when open, their flexible multi-panel stacking options allow facility owners to customize door movement based on site layout. Whether configured for manual operation or equipped with automated drive systems, horizontal sliding hangar doors offer a highly practical, weather-tight, and economical solution for protecting critical aviation assets.
As one of the most popular and versatile systems on the market today, bottom rolling hangar doors offer the heavy-duty performance and custom flexibility required by modern aviation facilities. Designed to carry the door’s weight directly on durable bottom rails embedded in the concrete floor, this system relieves the building's roof structure from supporting massive overhead loads. Bottom rolling doors are available in a wide variety of versatile configurations—including uni-directional, bi-parting, individually powered independent panels, and advanced "Smart Rail" setups—allowing facility managers to customize how and where the doors stack. This adaptable design allows you to open only the section of the hangar needed for a specific aircraft, drastically reducing unnecessary exposure to outside elements and keeping energy costs down.
Because of their immense structural stability and customizable panel arrangements, bottom rolling door systems are the go-to solution for facilities of every scale. From high-traffic Fixed Base Operator (FBO) facilities and commercial airline repair bays to secure government and military installations, these doors are engineered to handle giant door openings while withstanding severe high-wind loads. Equipped with heavy-duty wheel assemblies, smooth motorized drive units, and tight weatherproofing seals, bottom rolling hangar doors deliver effortless push-button operation, long-term durability, and maximum security for your highest-value aviation assets.
For aviation enthusiasts, airpark residents, and luxury property owners, residential hangar doors provide the ultimate blend of high-performance security, weather protection, and architectural style. Tailored specifically for home hangars, airpark estates, and multi-use residential workshops, these custom door systems are engineered to integrate seamlessly into your home's exterior design while providing effortless access for personal aircraft, RVs, and vehicle collections. Whether configured as a space-saving bi-fold, a sleek single-panel hydraulic, or a classic sliding door system, residential hangar doors deliver commercial-grade durability scaled perfectly for private properties.
Beyond delivering smooth, push-button convenience, high-quality residential hangar doors are built to protect your private aviation investment from severe weather, high-wind conditions, and intruders. Featuring heavy-duty structural steel framing, tight weather seals, and options for full thermal insulation, these doors help regulate indoor temperatures to keep airpark living spaces comfortable and energy-efficient year-round. With customizable finish options—including custom glass panels, wood-grain cladding, and designer architectural trims—residential hangar doors allow homeowners to maintain superior curb appeal without sacrificing the rugged reliability and security required for home aviation facilities.
When a hangar door system fails, immediate attention is required to prevent costly operational delays, security risks, and potential safety hazards. Professional hangar door repair services provide essential emergency response and routine corrective maintenance for all major door types, including bi-fold, hydraulic, bottom-rolling, and horizontal sliding configurations. From replacing snapped cables, worn roller bearings, and frayed drive straps to repairing damaged structural panels and hydraulic cylinders, expert technicians possess the specialized tools and heavy-duty hardware needed to restore proper alignment and functionality. Prompt, precision repairs eliminate severe structural strain on your building’s frame, ensuring your door operates smoothly, safely, and without warning failures.
Partnering with a licensed and certified hangar door repair specialist ensures your facility remains fully secure and compliant with strict safety regulations. High-performance repair services go beyond quick fixes by diagnosing underlying mechanical, electrical, and drive-system issues, such as faulty limit switches, misaligned floor tracks, or failing motor gearboxes. Whether servicing a private residential airpark hangar or a high-traffic commercial FBO facility, fast 24/7 emergency repair services minimize operational downtime and protect high-value aircraft from storm exposure and theft. By trusting experienced technicians to handle complex high-tension components and heavy door structures, facility managers can maintain maximum reliability and extend the working lifespan of their entire door system.
In the fast-paced aviation industry, high-traffic commercial facilities require robust, fully operational door systems to maintain seamless ground operations. Professional commercial hangar door services encompass comprehensive installation, preventive maintenance, structural upgrades, and emergency repairs tailored for Fixed Base Operators (FBOs), corporate flight departments, cargo hubs, and aerospace manufacturing plants. Whether your facility utilizes massive bottom-rolling systems, high-speed hydraulic doors, or heavy-duty vertical bi-fold doors, specialized commercial service providers deliver the engineering precision and heavy equipment necessary to keep large-scale door openings functioning reliably day in and day out.
Unplanned hangar door downtime directly impacts flight schedules, grounds high-value commercial aircraft, and disrupts revenue-generating operations. Comprehensive commercial service plans prioritize proactive maintenance, identifying minor mechanical wear before it escalates into costly structural failures. Certified commercial technicians perform rigorous multi-point inspections—evaluating drive motors, hydraulic lines, cable tensions, track alignment, safety sensors, and weather seals. By maintaining smooth, synchronized movement across all moving parts, routine maintenance minimizes operational friction, protects expensive drive components, and extends the overall working lifespan of multi-ton door assemblies.
When mechanical breakdowns or storm damages occur, rapid-response commercial repair teams are essential to restoring security and functionality. Commercial hangar door specialists offer 24/7 emergency repair dispatch, equipped to handle high-stress components like snapped lifting cables, bent floor tracks, blown hydraulic pumps, and electrical control failures. Expert technicians possess the specialized rigging gear, heavy cranes, and mobile welding equipment required to safely handle massive door panels under strict industrial safety guidelines. Swift, professional interventions minimize costly facility downtime and ensure your high-value aviation assets remain protected from extreme weather exposure.
Modern commercial hangar door services also focus heavily on energy management, environmental control, and regulatory compliance. Large commercial hangars consume massive amounts of energy to heat or cool expansive interior spaces. Upgrading aging weather seals, installing thermal insulation panels, or integrating modern high-speed drive units significantly reduces air loss during aircraft rollouts. Commercial service experts help facility managers lower utility costs, improve indoor working conditions for ground crews, and maintain compliance with local wind-load engineering codes and OSHA safety standards.
Hiring a fully licensed, bonded, and insured commercial hangar door contractor ensures your facility receives industry-leading craftsmanship backed by structural expertise. From turnkey design-build installations for new commercial developments to complete retrofits of legacy door systems, specialized commercial services provide the ultimate peace of mind. By maintaining peak door efficiency and structural integrity, commercial hangar operators can confidently protect multi-million dollar fleets, maintain tight flight schedules, and preserve long-term property values.
MEGA DOOR CO — The Hangar Door Specialists
Worldwide Service & Fabrication | 24/7 Emergency Support
MEGA DOOR CO is a premier worldwide installer and contractor for high-performance hangar door systems. We design, fabricate, and build engineered structural headers to support any hangar door configuration—including Rolling, Biparting, Bi-Fold, and Hydraulic doors—on steel, concrete, or wood-frame structures.
With NO geographical limitations, we travel directly to your site anywhere in the world. If you have a project, we are ready to build it.
Complete Hangar Door Solutions:
Call MEGA DOOR CO for all your installation, service, maintenance, and repair needs across all door types:
Licensed, Bonded & Insured
24/7 Emergency Service
Direct: 407.966.MEGA (407.966.6342)
MEGA DOOR CO is reliable, fast and professional. Call us today for all your service and repair needs, we'll help you solve the problem!
Our friendly and dedicated technicians at MEGA DOOR CO are trained with the latest knowledge and equipment to meet all of your hangar door needs.
Let us install, motorize, repair, and engineer a system that will work for you.
We offer extensive services in repairing and installing airplane hangar doors, and of course, satisfaction is guaranteed.
407.966.MEGA
